Kohler VIA Series Installation Instructions Manual page 19

4) It is ready to use when connected to water supply after
installation.
Note: Reserve access panel at front of the tank in
remote installation.
4)
2. K-23055T-PNE installationn
2. K-23055T-PNE
1) Suggested faceplate fixed frame installation direction
1)
2) Connect air hose to faceplate from water tank
2)
3) Insert faceplate into faceplate fixed frame with half flush
upward. Installation is completed.
3)
4) It is ready to use when connected to water supply after
installation.
Reserve access panel at front of the tank in remote
installation.
4)
5) How to remove.
5)
1 Push Up
2 Pull Out
3 Pull Out
1288805-T01-B
Full Flush
Button
.
.
-14-
Up
Half Flush Button
Full Flush Button
1
Half Flush Button
Air Hose
Faceplate
3
2