Non-Setup Parameters - Wyse WY-75 Quick Reference Manual

NON-SETUP PARAMETERS
Although not accessible in the setup, the following parameters are also saved in
nonvolatile memory according to their current status at the time the setup
configuration is saved.
Parameter
Key click
Scrolling rate
Status line display
Width-change clear
Explanation
Press CTRL and SHIFT with ENTER to toggle
the key click feature OFF and ON (default).
Press CTRL with'" (CURSOR UP) to scroll
faster.
Press CTRL with
T
(CURSOR DOWN) to
scroll slower.
Jump scroll: I row at a time (default)
Smooth scroll
(il
8 rows per second
Smooth scroll
(il
4 rows per second
Smooth scroll
(iL
2 rows per second
Smooth scroll
((10
I row per second
Press CTRL with
~
(CURSOR RIGHT) to tog-
gle the display of the local and host computer
message fields in the top row OFF and ON
(default).
Enter the block mode by pressing BLOCK and
type ESC [ 35
J(L)
for ON (default). Then exit
the block mode by pressing BLOCK again.
Enter the block mode by pressing BLOCK and
type ESC [ 35 h for OFF. Then exit the block
mode by pressing BLOCK again.
When ON, the screen clears whenever the screen
column width is changed.
Non-setup Parameters 9