Baud Rate Selection - Wyse WY-75 Quick Reference Manual

BAUD RATE SELECTION
The terminal haud rates are determined hy the selections made for thl.:
Modem
port speed
and
Aux port speed
paraml.:ten, in the setup. They must match the host
computer baud rate (modem port) and the printer haud rate (auxiliary port).
For the modem port, handshaking is always recommended, and it is rcquired with
the folluwing:
• Baud rates of
19200
or
3X400
• Smooth scroll
• No scroll mode
• Transparent passthru print mode
• Copy passthru print mode
The aux iliary port always recognizes DTR handshaking from the printer, regard-
less of the handshake mode.
Bits Per Second
Modem Port Aux. Port Stop Bits
50 2
75 2
110 110 2
134.5 134.5
I
150 150 1
200 I
300 300
I
600 600 1
1200 1200
I
IXOO 1800
I
2000 2000
i
2400
2400 I
3600
I
4XOO 4800
I
7200
i
9600 9600 I
19200 19200
I
3X400
I
If incOIll'ct characters arc echoed by the host computer or if error (checkerhoard)
charactl'ls are displayed, either the modem port speed, parity, handshake, or
nUll1bCl uf data bits is incorrectly set.
In partlt'lIlar, if alphanumeric keys are correctly recognized by the host computer
but thl' L'llrsor keys, PF keys and programmed function keys are not, it is the
nUll1bCl ()\ data bits and the parity that are set wrong.
Baud Rate Selection 45