Escape Code Sequences - Wyse WY-75 Quick Reference Manual

ESCAPE CODE SEQUENCES
The following table briefly describes the actions perfonned by the WY-75 tenni-
nal when it receives ANSI mode escape code sequences. Also listed is the ANSI,
DEC, or WYSE private mnemonic for the command. WYSE mnemonics begin
with WY. DEC mnemonics begin with DEC. All others are ANSI mnemonics.
Within the escape code sequence, parameter values are noted within angle brack-
ets (e.g., <PO> is the first parameter; Pi signifies any legal parameter value).
Sequence Default Mnemonic Action
ESC )) (space) WYID Reports the Wyse product
number to the host
computer (sends 75
CR).
ESC, WYDELAY Delays processing for
approximately 250
milliseconds.
ESC 5
WYXCH Transmits the character at
the cursor address.
ESC 7 DECSC Saves the cursor position,
attribute, wrap flag,
character sets, and
origin mode status.
ESC 8
DECRC Restores the previously
saved cursor position,
attribute, wrap flag,
character sets, and
origin mode status.
ESC
=
DECKPAM Turns on the keypad
application mode.
ESC > DECKPNM Turns off the keypad
application mode.
ESC D IND Moves the cursor down
one row, scrolling the
screen up at the last row.
ESC E
NEL Moves the cursor to the far
left column of the next
row, scrolling the screen
up at the last row.
10 Escape Code Sequences