Ats (Vt-52) Escape Sequences Supported - Wyse WY-75 Quick Reference Manual

ATS (VT -52) ESCAPE SEQUENCES SUPPORTED
When the WY -75 is in ATS mode, the following escape sequences are recog-
nized. Upon entering the ATS mode, the active character set is reset, but the
active terminal modes are unaffected.
Sequence
ESC A
ESC B
ESC C
ESC D
ESC F
ESC G
ESC H
ESC I
ESC J
ESCK
ESC V
ESCW
ESC X
ESC Y
<row> <col>
ESC Z
ESC]
Action
Moves the cursor up one row.
Moves the cursor down one row.
Moves the cursor right one column.
Moves the cursor left one column.
Selects the graphics character set.
Selects the standard US ASCII character set.
Moves the cursor to the home position: row I
column I of the screen display.
Moves the cursor up one row and scrolls if at
the top row (reverse line feed).
Erases from the cursor location to the end of
the screen.
Erases from the cursor location to the end of
the line.
Copies the cursor row to the auxiliary
(printer) port.
Enables transparent passthru print mode (only
ESC X is acted on).
Disables transparent passthru print mode.
Moves the cursor directly to <row>, <col>.
where <row> and <col> are the hexa-
decimal codes for the designated row and
column
+
IFH. For example:
ESC Y ! &
moves the cursor to row 2, column 7.
Requests the terminal identification report
(response is
ESC /
Z).
Copies the screen display to the auxiliary
(printer) port.
A TS Escape Sequences 23