370XA Gas Chromatograph
APRIL 2014
3.14.7
Connect a computer directly to the 370XA
The Ethernet 1 port uses a common RJ-45 connector for connections
between local devices and includes a Dynamic Host Configuration
Protocol (DHCP) server that automatically configures the settings of a
computer when it connects to Ethernet 1.
Switch on the DHCP server for a local, single-computer connection, or
switch it off if you intend to connect Ethernet 1 to multiple devices on a
local area network (LAN).
3.14.8
Connect a local computer to the 370XA
1.
your network administrator or the person in charge of
configuring your supervisory system network for the settings
required to connect the GC to your network.
Locate the switch at SW1 (1) on the back plane. It is in front of
the RJ-45 Ethernet plug (2). Flip the switch on. This activates
the GC's DHCP server. The server typically takes 20 seconds
to initialize and start up.
System Reference Manual
7P00370-H01
3 - 51