Agilent Technologies 54622A User Manual page 74

Triggering the Oscilloscope
To use pulse width triggering
5 Select the qualifier time set softkey (
to set the pulse width qualifier time.
The qualifiers can be set from 10 ns to 10 s.
< qualifier time set softkey
• When the less than (<) qualifier is selected, the Entry knob sets the
oscilloscope to trigger on a pulse width less than the time value displayed
on the softkey.
• When the time range (><) qualifier is selected, the Entry knob sets the
upper time range value.
> qualifier time set softkey
• When the greater than (>) qualifier is selected, the Entry knob sets the
oscilloscope to trigger on a pulse width greater than the time value
displayed on the softkey.
• When the time range (><) qualifier is selected, the Entry knob sets the
lower time range value.
3- 14
or ), then rotate the Entry knob
< >