Removing The Separation Roller - Canon F1 Service Manual

4
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Separation Roller > Procedure

Removing the Separation Roller

■ Preparation
1) Removing the Pickup Roller Unit (Refer to page 4-38).
■ Procedure
CAUTION:
Be sure not to touch the surface of the roller when disassembling/assembling.
1) Lift the Original Pickup Tray [1].
2) Remove the Pickup Guide (Lower) [1] from the lower side of the Original Pickup Tray.
• 2 Screws [2]
x2
4 Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Separation Roller > Procedure
[1]
F-4-109
[1]
[2]
F-4-110
3) Remove the Separation Roller Unit [1].
• 2 Screws [2]
x2
4) Lower the Original Pickup Tray.
5) Remove the Separation Roller [1] and the Roller Shaft [2].
[1]
6) Remove the Roller Shaft [2] from the Separation Roller [1].
• 1 Bearing [3]
[3]
[2]
[1]
F-4-111
[2]
F-4-112
[2]
[1]
F-4-113
4-44
4-44