Removing The Dust Collecting Sheets Type - Canon F1 Service Manual

4
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Dust Collecting Sheets Type E > Procedure
Removing the Dust Collecting Sheets Type E
■ Procedure
1) Open the Feeder Cover [1], and remove the Upper Guide [2].
• 2 Screws [3]
• 2 Springs [4]
[1]
x2
[3]
2) Remove the 8 Dust Collecting Sheets Type E [1].
[1]
4 Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Dust Collecting Sheets Type E > Procedure
[4]
[2]
F-4-114
[1]
F-4-115
CAUTION:
When affixing the 8 Dust Collecting Sheets Type E [1], they should be aligned with the
lines [A].
[1]
[1]
CAUTION:
• When assembling, be sure to align the 2 springs [2] with the 2 protrusions [1].
• When installing the Upper Guide, be sure to place the 5 sheets [4] of the Upper
Guide on the upper side of the 5 Feed Rollers [3].
[1]
[3]
[4]
4-45
[A]
F-4-116
[2]
F-4-117
4-45