Consumable Parts For Periodical Replacement And Locations For Cleaning (Dadf); Removing The Pickup Roller / Feed Roller - Canon F1 Service Manual

4
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Pickup Roller / Feed Roller > Procedure
3) Remove the Stamp Inner Cover [1].
• 1 Screw [2]
4) Remove the Stamp Solenoid [1].
• 2 Screws [2]
• 1 Stamp Support Plate [3]
• 1 Connector [4]
[2]
[1]
4 Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Removing the Pickup Roller / Feed Roller > Procedure
[2]
[1]
F-4-103
[2]
[3]
[4]
F-4-104
Consumable parts for periodical replacement and
locations for cleaning (DADF)

Removing the Pickup Roller / Feed Roller

■ Preparation
1) Removing the Pickup Roller Unit (Refer to page 4-38).
■ Procedure
CAUTION:
Be sure not to touch the surface of the roller when disassembling/assembling.
Removing the Pickup Roller
1) Remove the Pickup Roller [2] and the Roller Shaft [3] from the Pickup Roller Unit [1].
• 2 Clips [4]
• 2 Bushings [5]
• 1 Belt [6]
[1]
[3]
[5]
[4]
4-42
[2]
[4]
[5]
[6]
F-4-105
4-42