Set Up Instructions - Stamina 15-4800R Owner's Manual

SET UP INSTRUCTIONS

4800R Recumbent Bike
Place the
Recumbent Bike
63" long (max.) x 28" wide x 33" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 7
feet long is required for safe operation of the
is available for access to and passage around the
LEVELING: Adjust the
Bike sets on the floor without rocking.
4800R Recumbent Bike
MOVING: The
Lifte up from
FUNCTION INSPECTION:
4800R Recumbent Bike
Visually inspect the
Check the function of the
to verify that the drive train functions properly. Adjust the
properly.
CAUTION:
Locate and read the
that all users read the
in the area where it will be used. It is recommended that the
be placed on an equipment mat. The
LEVELING CAPS(49)
REAR STABILIZER(4)
4800R Recumbent Bike
WARNING LABEL(75)
WARNING LABEL(75).
4800R Recumbent Bike
4800R Recumbent Bike
4800R Recumbent Bike
REAR STABILIZER(4)
on the
WHEELS(48)
has a pair of
4800R Recumbent Bike
to move the
EQUIPMENT MAT
Please note the Rear Frame of the
Recumbent Bike is adjustable, use the
longest size to determine the size of the mat.
to verify that assembly is as shown in the above illustration.
. Turn the crank slowly through one complete revolution
TENSION KNOB(24)
on the
9
. Make sure that adequate space
.
so that the Recumbent
FRONT STABILIZER(2).
on the
and verify that it functions
4800R Recumbent Bike
4800R
is approximately
.
. Make sure