Table of Contents
Advertisement
Issue 5, June 1999
call is originated by some other method than a handset off
hook.
• Drop Last Party of Conference (Key or Menu and Dialog Keys)
Clear the last party added to a conference either by selecting
the Drop Last Party option from the menu system or by
pressing the Drop Last Party key.
• Release A Consultation Call (Menu and Dialog Keys)
Clear an active consultation call by selecting the Release This
Call option from the menu system. The active consultation call
is cleared, and the original party on hold is retrieved.
Clear a CaliOn Hold
• Preview
(Key)/Line
Key
Associated
with
the
Held
Call/Disconnect (Key)
To clear a call on hold while another call is active and in
progress, first press the Preview Key to enter the Preview
mode; then press the Line key associated with the call on hold;
finally, press the Disconnect key. The call on hold is released,
with no interruption of the active call.
• Preview (Key)/Line Key Associated with the Held Party of a
Conference Call/Drop Last Party (Key or Menu and Dialog
Keys)
If the party on hold is the tast party added to a conference call,
first press the Preview key to enter the Preview mode; then
press the Line key associated with the conference on hold;
finally, either select the Drop Last Party option from the menu
system or press the Drop Last Party key. The last party added
to the conference is cleared, with no interruption of the active
call.
Hold a Call
• Hold (Key or Menu and Dialog Keys)
Place an active, connected call on hold by either selecting the
Hold option from the menu system or pressing the Hold key.
1275·00030
Issue 5, June 1999
• Line Key (Other Than Line Key Associated with the Active Call)
Place an active, connected call on hold by pressing the line
key for a different call appearance.
If
the call appearance
associated with that Line key was idle, a new call is originated;
if an incoming alerting call was selected, the call is
answered/connected; if the call appearance was on hold, the
call is retrieved.
• Preview (Key)/Line Key Associated with Another Incoming
Call/Answer Call (Menu and Dialog Keys) or Connect (Key)
Place an active, connected call on hold and accept an
incoming call offering by first pressing the Preview key to enter
the Preview mode; then press the Line key associated with the
incoming alerting call; finally, either select the Answer Call
option from the menu system or press the Connect key. The
active call is placed on hold, and the selected incoming call is
connected.
• Consultation Call (Menu and Dialog Keys)
An active, connected call is placed on hold when a
Consultation Call Is invoked.
Select the Consultation Call
option from the menu system. The active call is placed on
hold, and the Optiset terminal selects the prime line call
appearance for the new call. Dial tone occurs on the prime line
call appearance.
• Conference (Key or Menu and Dialog Keys)
An active, connected call is placed on hold when a Conference
Call is invoked. Either select the Conference Call option from
the menu system or press the Conference key. The active call
is marked for conference and placed on hold; the Opliset
terminal selects a line for the new call appearance or prompts
you to Select a Line, after which dial tone occurs on the
selected line.
• Transfer (Key or Menu and Dialog Keys)
An active, connected call is placed on hold when a Call
Transfer is invoked. Either select the Transfer option from the
menu system or press the Transfer key. The active call is
1275-00030
32
33
Advertisement
Table of Contents
