Assign, Change, Or Delete Password - Siemens OPTISET NI-1200 Operating Manual

'ssue 5, June 1999
Use the keypad to enter the
1- to 7-digit password
assigned to your terminal.
Use the <:J dialog key to
back-space if you need to
retype a character.
An
asterisk appears in the
display for each character you
enter.
Press the tI' dialog key when
you have finished entering the
password.
*******
Enter password
Phone configuration menu
1 -
Initial settings? <>
Assign, Change, or Delete Password
You can protect the programmed configuration of your Optiset
terminal by assigning it a password. Or, if a password atready has
been assigned to your terminal and you know the password, you
can change it or delete it. Proceed as follows:
Procedure Display
Use the <:J and
I>-
dialog
keys to scroll through the
displays until "Configure
phone?" appears.
THU FEO 04, 99 09:55 AM
Configure phone?
<>
Press the
tI'
dialog key to
select the Phone
Configuration menu. "
prompted, use the keypad to
enter the currently assigned
password, and then press
the
tI'
dialog key to continue
to the Phone Configuration
menu.
Use the
[:>
dialog key to
scroll to "Password?"
Press the
tI'
dialog key to
select the Password menu.
To assign a password
or
to
change the existing
password, use the keypad to
enter up to 7 digits (may
include "." and "n"). Use the
<:J dialog key to back-space
if you need to retype a
character.
An asterisk appears in the
display for each character you
enter.
To delete an existing
password, do not enter any
characters.
Press the tI' dialog key.
'ssue 5, June 1999
Phone configuration menu
1 -
Initial settings? <>
Phone configuration menu
5 -
Password? <>
IE~t~~-~ew
password
If
characters are entered:
*******
Enter new password
If
no characters are entered:
IE~t~~-~ew
password
I
l;;;~~;-new
password
1275-00030
1275·00030
42
I
I
43