Issue 5, June 1999; Establish A Conference Call (Using The Conference Key) - Siemens OPTISET NI-1200 Operating Manual

Issue 5, June 1999
Issue 5, June 1999
Lislen for audible ringing.
If
a
busy signal is
encountered, refer to
Back
Oul of a Transfer or
Conference Setup (Because
of Busy Signal)
When the Iransferee answers,
hang up.
1555-5565
I
Ringing
THU FEB 04, 99 09:43 AM
<>
A call is active.
Determine the number of
parties you will join to the
conference.
Press the:
• Conference key (for a
Small Conference)
• Large Conference key
and then the
Conference key (for a
Large Conference)
The active call is placed on
hold, and
a
second line
provides dial tone.
For alternative ways to establish a conference call, refer to "Set Up
Conference Call" in section 3. ALTERNATIVE CALL
OPERATIONS.
555-5555 01:05:22
1I01d?
<>
0
1 \ a1: I
Dial the number of the party
you want to add to the
conference call.
Listen for audible ringing.
/( a busy signal is
encountered, refer to Back
Out of a Transfer or
Conference Setup (Because
of Busy Signal)
When the conferee answers,
announce the call and then
press the Conference key
again.
When all parties are on the
line, conduct the conference.
When the conference is
finished and the other parties
have disconnected, hang up.
555~5565
Cancel Conference? <>
555-5565
Ringing
For alternative ways to transfer a call, refer to "Transfer a Call" in
section 3.ALTERNATIVE CALL OPERATIONS.
Establish a Conference Call (Using the Conference Key)
Procedure Display
Iconference
Conference
Drop
last
party?
<>
TIIU FEB 04, 99 09: 43 AM
<>
20 1275-00030
21
1275·00030
I