Opening The Digital Telephone Directory; Performing The Display Test; Using The Message Waiting Indication - Siemens HiPath 4000 Operating Instructions Manual

START DTB
DISPLAY TEST
J
J ?
or
42

Opening the digital telephone directory

You can use this function to open the telephone system's digital tele-
phone directory.
Note:
The digital telephone directory must be configured at the tele-
phone system.
Please proceed as shown in the overview on page 37 and follow the
prompts to perform the function.

Performing the display test

Using this function, it is possible to check whether all display items
are displayed correctly.
Please proceed as shown in the overview on page 37 and follow the
prompts to perform the function.
All display items are briefly dimmed when performing this function. If
not, please consult your system administrator.

Using the message waiting indication

If you did not accept calls or voice mails, these are signalled by this
icon on the mobile telephone's display line.
With this function, you can call up all new messages in the mailbox or
access the caller list directly.
Note:
Voice messages and calls that were already played back are
not signalled.