Opening The Gigaset.net Directory - Siemens Gigaset A580IP Manual

Opening the Gigaset.net directory

Your handset is in idle status.
s
Or:
¤
Open the directory with the s button.
¤
Select Gigaset.net from the directory and press the Talk key c. A connection
to the Gigaset.net directory is established.
Please note
u
The Gigaset.net directory entry is transferred to a handset when it is registered
with the base station, if the handset can send and receive directory entries.
u
Calls to the Gigaset.net directory are always free of charge.
u
You can also open the Gigaset.net directory by dialing 1188#9 (phone number
of the Gigaset.net directory) and pressing the Talk key
If a connection cannot be made to the Gigaset.net directory, an error message will
be sent and the handset will go into idle status.
After opening the Gigaset.net directory for the first time
When opening the Gigaset.net directory for the first time you can use the
Gigaset.net wizard to create an entry in the Gigaset.net directory for your phone.
You will see the following display:
No
¤
Press the Display key
Please note
If you press
the Gigaset.net directory (
Press and hold.
Start
Gigaset.net
wizard?
Yes
§Yes§
to start the wizard.
§No§
the wizard will be canceled. You can then create the entry later via
£
Page 50).
VoIP telephony via Gigaset.net
c
.
47