Siemens HiPath 4000 Operating Instructions Manual page 26

Second
telephone
o
Enter station no.
Enter ID
ID entered for
45678
o
16
• Open the login window on the telephone system with a second
telephone. Carry out the steps described below.
The second telephone can be a mobile telephone that has already
been registered or a Hicom telephone with display, e.g.
"Optiset E".
It has to be registered at the same system and connected to the
same network node. Ask your administrator about this.
Note:
The login window closes automatically after ten minutes. Mo-
bile telephone registration must be performed within this time
and must not exceed one minute.
Enter the code for activating the code number.
Please enter the phone number assigned. For network-wide code no.:
terminate the phone number with "#".
Enter the mobile telephone's code number (PIN E1). Stars are dis-
played instead of digits. For network-wide code no.: terminate the
phone number with "#".
The phone number entered is displayed, e.g.45678.
Enter the phone number displayed for confirmation but do not termi-
nate with "#".
The ring tone sounds briefly. The logon window opens for 10 minutes
when the ring tone is no longer audible.