Switching Functions; Ringing Status; Overview; Functions - Siemens HiPath 4000 Operating Instructions Manual

On or message status
c
o
+

Ringing status

CALLBACK
DIAL AGAIN

Switching functions

Ringing status

Overview

The following overview shows the switching functions which can be
accessed in ringing status. The desired called party is called in the
ringing status but has not yet answered the call.
Switching functions
CALLBACK
DIAL AGAIN

Functions

You can use this function to save a callback request if the internal par-
ty called is conducting a call, does not answer or switched off his/her
mobile telephone.
The callback is performed by the telephone system as soon as the
called party performs one of the following tasks:
• Ends the call
• Activates the mobile telephone and conducts a call
• Performs the callbacks saved in the telephone system's mailbox
The callback is deleted if you do not answer it within four rings.
Note:
• Stored callbacks can not be deleted. Program the tele-
phone system to perform the callbacks.
• The number of callbacks that can be stored depends on
the system setting.
You can use this function to save a phone number if the internal party
called is conducting a call or does not answer.
[
[ o
+
49