Setting The Sound Setting Functions; Menus - Siemens HiPath 4000 Operating Instructions Manual

Finding and
setting
F G
or
D E
or
Save
Menu When selecting the menu, the tone sounds at the current setting in
Handset Volume
Menu When selecting the menu, the ringer sounds at the current setting.
Ringer Settings
32

Setting the sound setting functions

Please proceed as shown in the overview on page 30 to find a sound
setting function. Then set the required sound setting function as fol-
lows:
Use the control key to change the volume, the melody or the status
of the sound setting function.
Use the control key to switch to the next function you want to set in
the menu.
Press this display key to save the settings after setting the sound set-
ting functions displayed in the menu.

Menus

handset mode. You can choose between five volume levels in hand-
set mode and three volume levels in speakerphone mode.
___Handset Volume__
1
f
2
B
Î
Î
You can choose between five ringer volumes, the crescendo ring
(gradual increase in volume), no ringer and ten ringer melodies (these
cannot be saved in HiPath Cordless Enterprise).
___Ringer Settings__
1
f
2
3
Time C.
Display when ringer is deactivated.
1 Volume in handset mode
2 Volume in speakerphone
mode
g
Save
1 Ringer volume
2 Ringer melody
g
3 Time control activation func-
9
tion for the ringer volume
Save