Fitting The Attachment Clip; Activating/Deactivating The Mobile Telephone - Siemens HiPath 4000 Operating Instructions Manual

Opening the
battery
compartment
Closing the
battery
compartment
Assembling the
attachment clip
a

Fitting the attachment clip

A second battery compartment lid is supplied with the mobile tele-
phone featuring a slot for the attachment clip. Assemble the
attachment clip as follows:
Unscrew the battery compartment lid with a coin, for example, (1) and
remove it (2).
Replace it with the second lid featuring the clip slot (3). Slide this back
over the battery compartment (4) and screw it on tightly (5).
Press the attachment clip until it locks into the slot (6).
1
2

Activating/deactivating the mobile telephone

Press the on-hook key until the activation or deactivation is confirmed
by a crescendo tone sequence.
See page 5 for display when the handset is on or in message status.
Note:
• The mobile telephone can only be fully switched off when
removed from the charging shell.
• The mobile telephone is automatically set to on or mes-
sage status if it is placed in the charging shell, see page 5.
5
4
3
6
13