Environmental Conditions; Radio Range; Displaying The Radio Range; Leaving The Radio Network - Siemens HiPath 4000 Operating Instructions Manual

Connection
quality
Range problems The radio range is different indoors and outdoors, see page 57.
After leaving the
radio network
Re-registering Switch off the mobile telephone and switch it back on again.
2

Environmental conditions

For safety information, see the back cover. Permitted temperature
range, see page 57.
Note:
Do not install the mobile telephone in the vicinity of electronic
equipment to avoid mutual interference.

Radio range

Displaying the radio range

The strength of the incoming signal is displayed by the "receive field
strength" icon in on or message status:
|
Ò
Ñ
Ð
Note:
Please consult your system administrator in the event of range
problems.

Leaving the radio network

The base name flashes on the display. The mobile telephone attempts
repeatedly to synchronise with a base. The intervals between syn-
chronisation attempts increase on account of the integrated power
saving function.
Note:
In order to save the battery you can switch off your mobile
telephone (this will reset the date and time, see page 40).
no receive field strength
low receive field strength
50% receive field strength
100% receive field strength