Setting Up The Telephone For Use - Siemens Euroset 5005 Installation Instructions Manual

recycling of used electrical and
electronic equipment.
For more detailed information
about disposal of your old appli-
ance, please contact your city
office, waste disposal service or
the shop where you purchased
the product.
Setting up the
telephone for use
Recommended
installation of telephone
◆
Do not expose the tele-
phone to direct sunlight or
other sources of heat.
◆
Operate at temperatures
of between +5°C and
+40°C.
◆
Maintain a distance of at
least one metre between
the telephone and radio
equipment, e.g. radio tele-
phones, radio paging
equipment or TV sets.
Otherwise, telephone
communication could be
impaired.
◆
Do not install the tele-
phone in dusty rooms as
this can limit the service
life of the telephone.
◆
Furniture lacquer and
polish can be adversely
affected by contact with
parts of the unit (e.g.
feet).
Dialling and saving
numbers
Dialling a number
co
Lift handset, dial
number.
Last number redial
The last number dialled is
automatically saved.
c;
Lift handset, press
last number redial
key.
2
EN
Repertory and speed dial
You can save 4 numbers (max.
21 digits) as repertory num-
bers on the 4 repertory keys
:
and 10 numbers as
speed dial numbers on the
number keys (max. 21 digits).
Saving (or saving with
notebook function)
c?
either ...
:
or ...
D0
o
?a
Dialling a repertory number
c:
You can also dial any addi-
tional digits.
Dialling a speed dial number
cD
0 9
...
Notes on saving and
deleting repertory and
speed dial numbers
*
and
regardless of the set dialling
mode but are only dialled with
DTMF dialling.
The following steps delete
numbers saved to the reper-
tory or speed dial keys:
◆
The number entered is
longer than 21 digits
◆
Saving a number will
delete the previous con-
tent of the memory
Lift handset, (or
with notebook
function: during a
call) press Set key.
As repertory
Press repertory
key;
As speed dial
9
...
Press speed dial
key and speed dial
number (number
key);
Enter number for
repertory or speed
dial.
Press Set key, (or
after the call:)
replace handset.
Lift handset, press
repertory key.
Lift handset, press
speed dial key.
Press speed dial
number (number
key).
#
are saved