Operating And Charging Times Of The Batteries; Permitted Batteries; Fitting The Attachment Clip - Siemens HiPath 4000 User Manual

Operating and charging times of the batteries

The operating times are only achieved after several charging and discharg-
ing cycles and are dependent on
• the battery capacity,
• the age of the batteries,
• the settings made,
• the user behavior,
• the DECT cordless system used
Stand-by mode (hours)
Talk time (hours)
Operating time with 1.5 hours calls
b
a day (hours)
Charging time in charging shell
(hours)
[a] with/without display lighting
[b] without display lighting (set display lighting

Permitted batteries

The following batteries are approved for use with the handset.
Nickel Metal Hydride (NiMH) battery
GPI International LTD 700 mAh AAA
UNION SUPPO Batt. 650 mAh AAA
SHENZHEN High Power Tech. Co. Ltd 650 mAh AAA

Fitting the attachment clip

Press the attachment clip onto the back of the handset so that the tabs on
the sides engage in the recesses on the phone.
Putting the Handset into Operation
Capacity (mAh) approx.
550
a
140 / 50 165 / 58 185 / 67 230 / 83
11
85
6.5
Page 33)
700 800 1000
12 14 17
95 110 135
7 .5 8.5 10.5
17