20.5.99
Parking a call
Resuming a parked call
kap09.fm5
Convenient and secure telephone communication
You can temporarily park a call in order to
reactivate it at a later stage,
resume it at another telephone,
unplug your telephone from one socket and plug it
into another.
The telephone must not be parked for more than three
minutes, as otherwise the call will be disconnected.
g
You are conducting a call.
Select "Park?" and confirm.
?
and
<>
o
Enter the connection code, e.g. 1 when prompted to in
the display. The connection code is a number under
which the call can be suspended and later resumed. The
permitted values are 1 to 99 or "none" (no input).
and a
Confirm and replace the handset.
?
You can program a "Park/resume" function key
(
You can resume a parked call from your own telephone or
from another telephone.
Prerequisite: a call is parked and you are not conducting a
call.
Select "Resume?" and confirm.
?
and
<>
o
Enter the assigned connection code if necessary.
c or
Lift the handset or confirm.
?
You are reconnected to the parked caller.
Profiset 70isdn, GB: A30853-X300-B501-3-7619
page 42).
57