System-Wide Parking; Manually Parking A Call; Retrieving A Parked Call - Siemens OpenStage 40 HFA HiPath 4000 Operation Manual

Step by step
Park to station?
Return to held call?

System-wide parking

On HiPath 4000 systems, you can park up to
ten internal and/or external calls and retrieve them on
another phone.
There are two options for parking a call:
• Automatic park
• Manual park
You cannot park calls if:
• All park positions are busy
• The park position you wish to use is busy
• The station is an attendant console
• The call is a consultation call
• The call is in a conference

Manually parking a call

You can manually park a call in a free park position from
your phone, and retrieve it on your phone or another
phone. You can also perform this function on non-dis-
play phones.
Own phone
Select and confirm.
j
Enter the destination number.
The call is now parked.
\
Replace the handset.
If "Park" is not available, you will receive acoustic and
also visual notification.
Confirm and continue the call.
or
\
Replace the handset. You will receive a recall for the call
on hold.

Retrieving a parked call

Destination phone
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
Making Calls – Convenience Functions
59