Activating/Deactivating The Individual Meter; Activating/Deactivating The Summation Meter For Charges - Siemens Profiset 70isdn Operating Instructions Manual

Siemens operating instructions telephone 70isdn
Table of Contents

Advertisement

20.5.99

Activating/deactivating the individual meter

>
Service?

Activating/deactivating the summation meter for charges

Service?
>
kap05.fm5
If the individual meter is activated, the accrued charges
are indicated for approx. 3.5 seconds in the telephone dis-
play following each call you make which is liable for charg-
es.
? >
3=local functions?
o
?
and
With password protection (
word.
>
1=charge meter?
The upper display line indicates whether the individual
meter is switched on or off.
<>
Select "switch over?".
?
Save the setting. If the individual meter was previously
deactivated, it is now switched on. If it was activated, it
is now switched off.
If the summation meter is switched on, the sum of all
charges accrued thus far is indicated for approx. 3.5 sec-
onds in the display following each toll call made.
? >
3=local functions?
o
?
and
With password protection (
word.
>
2=summation meter?
The upper display line indicates whether the summation
meter is switched on or off.
<>
Select "switch over?".
?
Save the setting. If the summation meter was previously
deactivated, it is now switched on. If it was activated, it
is now switched off.
There may be differences between the device's
meter and the individual meter of the switching
centre. The individual meter of the network op-
erator is definitive for the telephone bill.
Profiset 70isdn, GB: A30853-X300-B501-3-7619
Programming telephone settings
? >
1=charges?
page 16): enter the pass-
?
? >
1=charges?
page 16): enter the pass-
?
?
?
23

Advertisement

Table of Contents
loading

Table of Contents