Parking A Call; Retrieving A Parked Call; Picking Up (Retrieving) A Held Call - Siemens HiPath 3000 Operating Instructions Manual

Calling Multiple Parties Simultaneously
Step by Step
Consultation
24

Parking a Call

You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telephone. This feature is useful if you
want to continue a call at another phone.
Precondition: You are conducting a call.
Press the key. LED flashes. Enter the code.
F>?
9 B L
... Enter the number of the park slot (0 - 9) and make a note
of it.
If the park slot number you entered is already being
used, you will hear the negative confirmation tone.
Please enter another number.
I
Replace the handset.

Retrieving a Parked Call

Precondition: One or more calls have been parked. The
telephone is idle.
C
Lift the handset.
G>?
Enter the code.
9 B
... Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.

Picking up (Retrieving) a Held Call

Precondition: One or more calls have been parked. The
telephone is idle.
C
Lift the handset.
F?<
Enter the code.
D
Enter the line number you noted earlier.
If a parked call is not picked up, after a specific
period of time the call is returned to the tele-
phone from where it was parked (recall).