Table of Contents
Advertisement
20.5.99
Sending info texts
>
Service?
Reading info texts
read info text
DTMF signalling
Keypad signalling
DTMF signals: off
kap09.fm5
Convenient and secure telephone communication
Prerequisite: "info text" is permitted (
? >
4=feature keys
Select and confirm info text.
?
and
<>
The LED for the "read info text" feature key flashes when
an info text is received (a programmed function key is a
prerequisite
Prerequisite: "info text" is permitted (
Press the "info text" key. The info text is displayed two
lines at a time. In the case of long directory numbers, the
info text is represented as a run-on text.
When a connection is set up, you can use the keypad to
transmit DTMF signals (tones in dual-tone multifrequen-
cy), e.g. to control an answering machine remotely.
Prerequisite: a connection is set up.
Enter the control digits. The digits entered appear on the
o
display preceded by "D:" for several seconds.
Instead of DTMF signalling, keypad information elements
(IE) can also be transmitted, e.g. in order to activate CEN-
TREX features (
Since DTMF signalling is set by default for your tele-
phone, it must first be deactivated. To do this, program a
feature key (
nals off?".
Prerequisite: a line has been seized, a connection set up,
or an existing connection has not yet been cleared down.
Press the programmed feature key "DTMF signals: off".
Enter control codes. The digits entered are shown on the
o
display.
Profiset 70isdn, GB: A30853-X300-B501-3-7619
page 25).
? >
19=send info text
page 42). The message "Info" is displayed.
page 25).
page 63).
page 42) with the function "24=DTMF sig-
?
61
Advertisement
Table of Contents
