Forwarding Calls; Call Forwarding; Programming And Activating Call Forwarding For Msn 1-3 - Siemens Profiset 70isdn Operating Instructions Manual

Siemens operating instructions telephone 70isdn
Table of Contents

Advertisement

20.5.99

Forwarding calls

Call forwarding

Programming and activating call forwarding for MSN 1–3
kap10.fm5
You can forward calls to another telephone for each direc-
tory number of your telephone.
You must apply to your local network provider for this fea-
ture. Inquire about the respective charges.
There are 3 forwarding modes:
Immediately: The call is forwarded immediately, no
signal.
Deferred: The call is forwarded after 20 seconds.
If busy: The call is forwarded if the line is busy.
Several forwarding modes can be active for each multiple
subscriber number (MSN) (e.g. the "if busy" forwarding
number may be different to the "deferred" number).
MSN 1 to MSN 3 are intended for Profiset 70isdn; in this
case only the telephone service is rerouted. Connection
requests with different service identifiers, e.g. data or fax,
are not forwarded.
Prerequisite: the "Forwarding" menu item is activated
(
page 26).
Select "Forwarding?" and confirm.
and
?
<>
?
and
Select the directory number which is to be forwarded and
<>
confirm (=on). Forwarding is only activated for this
number.
Select forwarding mode "immediately", "deferred" or "if
?
and
<>
busy" and confirm.
The last call forwarding number is prompted.
The number can be deleted by backspacing with
edited with
?
Confirm.
Call forwarding is active.
The call charges incurred in connection with call
forwarding (e.g. car telephone/mobile phone)
are not displayed on the Profiset 70isdn nor reg-
istered on the summation meter.
The caller only pays for the connection between
his or her phone and the initial destination; the
remainder of the connection must be paid for by
the party who has activated call forwarding.
Profiset 70isdn, GB: A30853-X300-B501-3-7619
Forwarding calls
o
.
and
<
65

Advertisement

Table of Contents
loading

Table of Contents