Table of Contents
Advertisement
20.5.99
Programming telephone settings
Clearing the summation meter
>
Service?
Activating/deactivating your own directory number display
Service?
>
24
kap05.fm5
The summation meter for charges can be cleared at any
time. The summation meter then restarts at 0.
? >
3=local functions?
o
?
and
With password protection (
word.
>
2=summation meter?
?
Confirm "Clear sum?".
You must apply to your local network provider for this fea-
ture. Inquire about the respective charges.
You can temporarily suppress the display of your directo-
ry number on another party's display.
? >
2=configuration?
o
?
and
With password protection (
word.
>
04=show own dir. No.?
The upper display line indicates whether or not your own
directory number is displayed.
<>
Select "switch over?".
?
Save the setting. If your number was previously shown
on the other party's display, it is now no longer displayed.
If it was not displayed, it is now displayed.
You can also prevent your own directory number
from being displayed by programming an "Anon-
ymous" function key (
"Anonymous" key is activated (LED lights up),
your directory number is not displayed.
Profiset 70isdn, GB: A30853-X300-B501-3-7619
? >
1=charges?
page 16): enter the pass-
?
?
page 16): enter the pass-
?
page 42). When the
?
Advertisement
Table of Contents
