Table of Contents
Advertisement
The maximum resolution of the DTF-510U is 1024 x 768, True Color (24 bit). As necessary, configure
the monitor control panel settings for the proper size and color resolution.
The number of colors is constrained by the performance of your computer or graphics card. Refer to the
documentation of the manufacturer for details.
You may also want to fine-tune the display. Please refer to Adjusting the LCD Monitor on page 16 for more
information.
To install the Wacom tablet software, turn off your computer and connect the USB cable or serial data
cable.
Tablet Software Installation for Windows * and Macintosh
After connecting all cables of the DTF-510U, turn on the DTF-510U and your computer. Allow the operating
system to fully load.
Insert the Wacom Tablet CD into the CD-ROM drive. The Wacom tablet software installer menu should
automatically display. If the menu does not display, double-click on the Install icon (located on the CD).
Click on the Install the DTF-510U button and follow the prompts to install the driver software.
Windows : After the driver installation is complete, make sure you can use your pen on the tablet display to
move the screen cursor.
Macintosh: After the driver installation is complete, restart your Macintosh. You will be able to use your
pen on the tablet display to move the screen cursor.
Be sure to read the R
If you have trouble in the Tablet software installation, refer to the Troubleshooting chapter in the online
Hel
in the Wacom Tablet CD. You can also open the online Help from the H
P
control panel.
Precede to Customizing the DTF-510U – The Basics.
*
Windows 98 and later.
DTE-510UEN.ind
DTF-510
DTF-510
DTF-510
M
file for late braking news.
EAD
E
DTF-510
7
DTF-510
menu from the W
ELP
03.4.9, 6:32 PM
T
ACOM
ABLET
7
Advertisement
Table of Contents
