Standard Web pages
5.9 Backup and restore
5.9.4
Transferring
You can open the transfer Web page by selecting the backup&restore icon from either the
home page or the navigation sidebar.
Precondition
The SD card file transfer function is available only when a required SD card is inserted into
the inverter.
Before data transfer, make sure that parameter settings are saved to the non-volatile
memory as standard parameter set. For detailed information about saving parameters, see
Section "Parameters (Page 34)".
Transferring standard parameters sets to SD card
1.
2.
52
Proceed as follows to transfer the standard parameter sets to SD card.
The transferring process completes when the following window appears. If the Web
page indicates that the transfer fails, you can select to transfer again.
SINAMICS G120 Smart Access
Operating Instructions, 04/2018, A5E43332487