5.6
JOG
You use this Web page to start the motor test run in JOG or HAND mode.
Operating sequence
1.
2.
3.
SINAMICS G120 Smart Access
Operating Instructions, 04/2018, A5E43332487
Open the JOG Web page by selecting the JOG icon from either the home page or the
navigation sidebar.
Proceed as follows to get control of the motor.
Run the motor in JOG or HAND mode (default mode: JOG).
Note that if desired, you can also test the motor rotation direction with the correspond-
①
ing button ("
"). The page shows the currently selected rotation direction ("
Standard Web pages
5.6 JOG
②
").
39