Siemens Sinamics G120 Operating Instructions Manual page 56

Upgrading
4.
5.
6.
Basic upgrading
1.
2.
3.
4.
5.
6.
7.
Note
Refresh the basic upgrading page if the connection status unexpectedly becomes
"disconnected" during upgrading.
56
Restart the SINAMICS G120 Smart Access. Note that if you do not click "Restart G120
Smart Access now", the SINAMICS G120 Smart Access will restart automatically after
the 10-second countdown time has elapsed.
Clear the browser cache.
Refresh your Web application.
Download the target upgrade file (*.bin file) from the following Web site to your local
drive (recommended on PC):
https://support.industry.siemens.com/cs/ww/en/ps/13225
Hold down the reset button when the module is in power-off state and then power on
the module.
Open the following Web site specific for basic upgrading:
http://192.168.1.1/factory/basicupgrade.html
Proceed as follows:
Restart the SINAMICS G120 Smart Access.
Clear the browser cache.
Refresh your Web application.
SINAMICS G120 Smart Access
Operating Instructions, 04/2018, A5E43332487