Siemens Sinamics G120 Operating Instructions Manual page 17

Note that this password change page includes a security level indicator. The indicator
uses different colors to indicate the security strength of your current password. For
detailed information, see the table below:
After your confirmation of the new password entry, the module restarts automatically.
7. Select the wireless network SSID of the SINAMICS G120 Smart Access and then enter
the new Wi-Fi password to launch the connection.
8. Enter the IP address (http://192.168.1.1 or https://192.168.1.1) to open the home page.
Note
If you forget the Wi-Fi password, use the reset button to reset the Wi-Fi configuration to
factory defaults.
Note
If your PC or mobile device that you use to access the SINAMCS G120 Web pages gets lost,
you must change the wireless network password as soon as possible to prevent
unauthorized access.
SINAMICS G120 Smart Access
Operating Instructions, 04/2018, A5E43332487
Password security level
Low
Medium
High
4.1 Establishing the wireless network connection
Description
The password includes 8 or 9 characters and is a mixture of numbers,
uppercase and lowercase letters.
The password meets one of the following two requirements:
The password includes 10 to 12 characters and is a mixture of
•
numbers, uppercase and lowercase letters.
The password includes 8 or 9 characters and is a mixture of num-
•
bers, uppercase and lowercase letters, and special characters.
The password contains 10 to 12 characters and is a mixture of num-
bers, uppercase letters, lowercase letters, and special characters.
Accessing the Web pages
17