Table of Contents
Advertisement
To install NetMeeting
Install NetMeeting in your PC following the procedure.
Setting Up the Compact Processor
When you call a remote party to hold a data conference
Set DATA to T.120 in the Dial Setup menu.
When you receive a call from a remote party to hold a data
conference
Set DATA to T.120 in the Answer Setup menu.
Note
We recommend to set AUDIO MODE to G.728 & G.722 in the
Dial Setup menu.
Setting Up NetMeeting
1
2
3
4
5
6
Select [NetMeeting] from the start pop-up menu or click
on the NetMeeting icon.
Select [Option] from the [Tools] menu.
Select [Protocols] tab, then click "Null Modem."
Click on the [Properties] button, then select the COM port
to be used.
Click on the [Properties] button, then set the transfer rate to
"115200."
Verify the following settings.
Data bits: 8, Parity: None, Stop bit: 1, Flow control: None
Click on the [OK] button repeatedly until the menu returns
to its first one.
Chapter 5 Meetings With Optional Equipment
97
Advertisement
Table of Contents
