Receiving Calls; Notes On Point To Multi-Point Meetings - Sony PCS-1500 Operating Instructions Manual

Starting a Point to Multi-Point Meeting
2
Enter the telephone number of the
first remote party to have a
meeting with in the A1 and A2
boxes (when NUMBER OF
LINES is set to 1B, only in the A1
box).
3
Press the DIAL ( ) button on the
Remote Commander.
The system dials the number that
is input in step 2, and the
indication "Dialing" appears on
the monitor screen.
When the connection is
completed, the indication
"MEETING STARTS!" appears
on the monitor screen.
4
Repeat steps 1 to 3 to connect the
second and third parties.
To hold a meeting with
registered remote parties and
unregistered parties mixed
Follow steps 1 to 3 of "To call
registered remote parties" and steps 1
to 3 of "To call unregistered remote
parties" according to whether the party
is registered.

Receiving Calls

The procedure is same as a normal
meeting.
For details on the procedure, see
"Receiving a Call" on page 34.
104
Chapter 6 Meetings With the Upgrade Kit
Notes on Point to Multi-
Point Meetings
See also "The Attribute" on page 110.
• The chair control is only available
from this terminal. Remote parties
cannot operate it.
• This system does not support
multiplex MCU connections.
• The number of lines is set to two
when ISDN is set to 2B; is set to one
when set to 1B. This is regardless of
the setting in the Dial List menu.
• One ISDN jack can connect with
only one terminal. Even if you
connect via 1B-channel, the number
of reomte parties is up to three.
• This system does not support
connections via the Inverse
Multiplexer interface (BONDING).