Table of Contents
Advertisement
Calling a Remote Party
6
7
To cancel dialing before the connection is completed
Press the CANCEL button on the Remote Commander.
To connect on a LAN
Notes
• Meetings on a LAN are only available when the optional
• The Manual Dial LAN menu is displayed only when LINE I/
28
Chapter 2 Basic Operation During a Meeting
PREFIX: Selects the prefix number setting.
DATA: Selects whether to have a T.120 data meeting.
For details on each setting of the items, see "On Items in
the Dial Setup Menu" on page 30.
• To select an item to be changed, select an item with the
joy stick on the Remote Commander, then press it.
• To set up an item, select a setting with the joy stick on the
Remote Commander, then press it.
• To cancel the setup, press the CANCEL button on the
Remote Commander.
Notes
• When using the Compact Precessor as the MCU, items
below cannot be set up:
ISDN RATE, AUDIO MODE, VIDEO MODE, DATA.
• When using a LAN, items below cannot be set up:
ISDN RATE, DATA.
Press the EXEC button on the Remote Commander.
The Manual Dial menu appears on the monitor screen
again.
Press the DIAL ( ) button on the Remote Commander.
The system dials the number that is input in step 2, and the
indication "Dialing" appears on the monitor screen.
When the connection is completed, the indication
"MEETING STARTS!" appears on the monitor screen.
PCS-I152 LAN Board has been installed.
F is set to LAN.
Advertisement
Table of Contents
