Table of Contents
Advertisement
Adjusting the Camera
If the frame is repeatedly extended to the full screen
The camera does not recognize the subject. Press the AUTO
TRACK button on the Remote Commander again and go back
to step 2.
If the lamp at the side of the lens lights up
The camera is not capturing the memorized subject correctly.
In this case, perform the pan/tilt operation so that the subject
comes into the screen. Or have the subject memorized onto the
camera again.
Note
When the frame does not track the subject, repeat steps 2 and 3
until the frame starts tracking the subject while adjusting the
lighting and the portion of the subject so that the color and
brightness of the subject is optimized.
50
Chapter 2 Basic Operation During a Meeting
Advertisement
Table of Contents
