Table of Contents
Advertisement
Receiving a Call
Answering Calls in Manual Answer Mode
When your system is in manual answer mode, you need to
connect incoming calls manually.
When a call comes in, the Compact Processor starts ringing,
and the indication "Incoming Call Answer?" appears on the
monitor screen.
Press the EXEC button on the Remote Commander.
Once the connection has been made, the remote party appears
on the local monitor screen, and local party appears on the
remote screen. You are now ready to hold your meeting.
The indication "MEETING STARTS!" appears on the monitor
screen.
If you do not want to receive a call
Press the CANCEL button on the Remote Commander.
The Compact Processor stops ringing.
If you are operating the system when a call comes in
The indication "PLEASE CLOSE THIS MENU" appears on
the monitor screen. If you receive the call, finish the current
operation. If you cannot receive the call according to your
current operations, ignore it and continue with the current
operation.
When the system fails to make a connection
The indication "CANNOT COMPLETE CONNECTION"
appears along with an ISDN cause code and a message on the
monitor screen.
For details on ISDN cause codes and messages, see "On
Screen Messages" on page 122.
When the optional PCS-I152 LAN Board has been installed
If a call comes in via the ISDN line during the meeting on a
LAN, the Compact Processor is busy.
36
Chapter 2 Basic Operation During a Meeting
Advertisement
Table of Contents
