Table of Contents
Advertisement
6
Press the ENTER button on the Remote Commander.
The name and telephone numbers (and the sub-address) are
registered.
7
Press the EXEC button on the Remote Commander.
The Dial Setup menu appears on the monitor screen.
Dial Setup
LINE I/F
ISDN RATE
AUDIO MODE
VIDEO MODE
PREFIX
DATA
SELECT:
8
Set up the following items:
LINE I/F: Selects the line interface.
ISDN RATE: Selects the ISDN transfer rate.
AUDIO MODE: Selects the protocol for digital audio
encoding of the audio.
VIDEO MODE: Selects the protocol for digital audio
encoding of the video.
PREFIX: Selects the prefix number setting.
DATA: Selects whether to have a T.120 data meeting.
For details on each setting of the items, see "On Items in
the Dial Setup Menu" on page 30.
• To select an item to be changed, select it with the joy
stick on the Remote Commander, then press it.
• To set up an item, select a setting with the joy stick on the
Remote Commander, then press it.
• To cancel the setup, press the CANCEL button on the
Remote Commander.
:ISDN BRI
:AUTO
:G. 728 & G. 722
:H. 261 CIF 15fps
:OFF
:OFF
Yes: EXEC
Chapter 4 Registration and Setup
No: CANCEL
(Continued)
77
Advertisement
Table of Contents
