Power Supply
Region/Carrier
EMEA
Power Supply
The Cisco IR807 comes with an external DC power connector. The 4-pin power entry connector (receptacle)
is mounted to the unit. The 4-pin power entry mating connector (plug) is attached to the receptacle. It is
removed during installation and used to connect to the DC power source, then reattached to provide power
to the unit.
Refer to
Figure 3: Power Connector Pin-Outs
Pin
Number
1
2
3
4
Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide
22
Modem
4G/LTE
Used
WP7502
800 MHz (band 20)
900 MHz (band 8)
1800 MHz (band 3)
2100 MHz (band 1)
2600 MHz (band 7)
Figure 3: Power Connector Pin-Outs, on page 22
Name
Description
DC In +
DC Power Positive Input
DC In -
DC Power Return
ALM
Alarm Common
REF
ALM IN
Alarm Input
3G UMTS/HSPA
850 MHz
900 MHz
1900 MHz
2100 MHz
for the location and values of the power connector.
Color
Red
Black
N/A
N/A
Product Overview
2G GSM/GPRS/EDGE
850 MHz
900 MHz
1900 MHz
2100 MHz