Cisco IR800 Series Hardware Installation Manual page 12

Industrial integrated services router
Table of Contents

Advertisement

Front Panel Icons and LEDs
SKU ID
Description
IR807G-LTE-GA-K9
EMEA
Note: The IR809G-LTE-VZ-K9 SKU has a single SIM card socket. The IR807G-LTE-NA-K9 and
IR807G-LTE-GA-K9 are equipped with dual SIM card sockets. Graphics in this guide show the dual SIM
SKUs.
Front Panel Icons and LEDs
The IR807 uses icons to show the different features of the device.
shows Icons and their associated LEDs with descriptions. LEDs are visible from the top cover and from the
front panel. The LEDs allows easy visibility for wall and desk mounted installations regardless of chassis
orientation.
Table 2: Icons with LEDs
Icon
Description/Activity
System - Power and System Status.
Off — No power
Green Steady on — Normal operation
Green Flashing — Boot up phase or in ROM Monitor
mode
Amber Steady on — Power is OK but possible internal
FPGA program failure
VPN
Off — No VPN tunnel
Steady Green — At least one VPN tunnel is up
GPS - GPS Status
Off — GPS not configured
Steady Green — GPS configured
Slow Flash — GPS Acquiring in Standalone GPS
Fast Flash — GPS Acquiring in Assisted GPS
Slow Flash is defined as the LED will be on for 0.25
seconds and off for 0.75 seconds.Fast Flash is defined
as the LED will be on for 0.25 seconds and off for
0.25 seconds.
Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide
10
Modem
Type
WP7502
Table 4: Icons only, on page 11
Table 2: Icons with LEDs, on page 10
shows the Icons without associated LEDs and their descriptions.
Icon
Description/Activity
Alarm - Alarm Input Status
Off — Normal operation
Red - Alarm State on the Alarm Input
User Configurable LED
RJ45 Fast Ethernet Ports -Link Status 0:1
Off — No link
Steady Green — Link is up
Flashing — Transmitting and Receiving data
Product Overview

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir807

Table of Contents