Table of Contents
Advertisement
4G-LTE-ANTM-D
• Nominal impedance: 50 Ohms
• Polarization: linear vertical
Mechanical Specifications:
• Radome material: white, black, red, or blue ABS, UL-94 V0
• Cable: 4 ft RG174 VW-1 compliant
• Height and base diameter: 90 mm and 137 mm
• Temperature rating: -40° to 185°F (-40° to 85°C)
• Mounting: 5/8-inch lug with serrated face nut (5/8-inch diameter hole through mounting surface)
• Can be used with the following cable extensions: 4G-CAB-ULL-20 and 4G-CAB-ULL-50
4G-LTE-ANTM-D
Description:
• Omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated
• Articulating Joint —It can be rotated 360 degrees and is capable of maneuvering into three stop positions:
• Male threaded Neill-Concelman (TNC) Connector —It lets you directly mount the antenna to any Cisco
Electrical Specifications:
• Frequency range:
• Maximum input power: 3W
• Connector: TNC male
• VSWR: 2.5:1 or less
• Nominal impedance: 50 Ohms
• Maximum Peak Gain: 2 dBi
Mechanical Specifications:
• Antenna base and radome color: Cisco Raven Black
• Dimensions: 9 (L) x 1.2 (W) x 7/16 in (D) (229 x 30.5 x 11 mm)
• Temperature rating: –22° to 158°F (–30° to 70°C)
Antenna Extension 4G-AE015-R
Description:
• Single-unit antenna extension base (15 ft [457.2 cm])
Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide
20
Services Routers Generation 2 systems
0 degrees, 45 degrees, and 90 degrees.
4G and Cisco 3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Cisco
4G-LTE-ANTM-D Ominidirectional Dipole Antenna, TNC Connector, and Articulation Joint). The
threads on the connector must comply with the ANSI 7/16-28 UNEF 2B thread specification.
• 698–806 MHz
• 824–894 MHz
• 925–960 MHz
• 1710–1885 MHz
• 1920–1980 MHz
• 2110–2170 MHz
• 2500–2690 MHz
Product Overview
Advertisement
Table of Contents
