Changing Paper Roll - VeriFone VX-520 Series User Manual

1. Hook your finger under the latch and lift up to swing the paper roll cover open.
2. Remove any partial roll of paper in the printer tray by lifting it up.
3. Loosen the glued leading edge of the new paper roll or remove the protective strip.
4. Hold the roll so the paper feeds from the bottom of the roll.
5. Drop the paper roll into the printer tray.
6. Pull paper up past the glue residue.
7. Close the paper roll cover by gently pressing directly on the cover until it clicks
8. Tear the paper off against the serrated metal strip in the printer.
V
X -520 Series APACS 40 User Guide
Downloaded from www.Manualslib.com

Changing Paper Roll

Unwind the paper roll past any glue residue.
shut, allowing a small amount of paper past the glue residue to extend outside the
printer door.
manuals search engine
5