VeriFone Vx520 Series Installation Manual

Hide thumbs Also See for Vx520 Series:

Download this manual See also: Reference Manual, Installation Manual

VeriFone Vx520 Series Installation Guide

IMPORTANT INFORMATION EMV CHIP CARD PROCESSING

This device has the ability to process EMV chip cards. If you are set

up to accept EMV chip cards you will notice a few differences when

presented an EMV chip card for payment.

1. EMV chip cards must be inserted into the device or pin pad if

attached (swiped transactions are not allowed).

2. The EMV chip card must remain in the device until the

transaction is complete

3. The transaction may require a customer to enter a PIN (similar

to a debit transaction).

4. EMV chip card transactions require the credit card to remain in

the possession of the cardholder at all times.

INSTALLATION INSTRUCTIONS

Step 1: Open box

Step 2: Follow installation instructions on page 2

Step 3: Begin processing

Verifone online help videos

can be found on YouTube

– search for "Verifone

Training Academy."

Watch the videos online or

from your smartphone.

www.paymentsinsider.com

for user guides and other DIY tips

1-866-451-4007

Activation & Training

for further assistance

8:30 AM – 9:00 PM EST, M-F

Your

Payment Solutions

Team

Page 1 Training Academy.” Watch the videos online or from your smartphone. VeriFone Vx520 Series Installation Guide IMPORTANT INFORMATION EMV CHIP CARD PROCESSING This device has the ability to process EMV chip cards. If you are set up to accept EMV chip cards you will notice a few differences when presented an EMV chip card for payment.
Page 2 Power Connection Communication Connections (Ethernet connection must be completed before the power is connected) (Connect the power after all other connectio (Ethernet connection must be completed before the power is connected) Router Router Communication Connections COMMUNICATION CONNECTIONS (Connect the po (Ethernet connection must be completed before the power is connected) (Ethernet connection must be completed before the power is connected) Router...