Oil Change Reminder System; System Activation; Cancellation - Suzuki DF250AP Owner's Manual

Hide thumbs Also See for DF250AP:
Table of Contents

Advertisement

Available languages

Available languages

OIL CHANGE REMINDER
SYSTEM
This system informs the operator of the time for
replacing engine oil on the basis of the mainte-
nance schedule.
The system is designed to register the total
operating hours of the outboard motor and indi-
cate when the preprogrammed number or
hours has been reached.
(Refer to the INSPECTION AND MAINTE-
NANCE section and the last page.)

SYSTEM ACTIVATION

When the total operating hours have reached
the preprogrammed hours, the "Change Oil" is
displayed on meter screen, and the buzzer
sounds. This indication will repeat until you can-
cel the system activation.
By pressing the "ENTER" button after confirm-
ing the display of "Change Oil", the caution
alarm icon appears on the display screen and
then the "Change Oil" indication will be cleared.
20
10
0
100
Change
Oil
30 40
50
P
60
OIL
70
RPM
0.00

CANCELLATION

1. Turn the main switch to the "ON" position.
2. Pull out the emergency stop switch plate 1.
3. Push the start & stop switch 2 three times in
10 seconds. A short beep will be heard if the
cancellation is successfully finished.
4. Turn the main switch to the "OFF" position.
5. Set the plate 1 in the original position.
NOTE:
• Canceling of the system activation is possible
regardless of whether or not the engine oil
has been replaced. Once the system has
operated, however, Suzuki strongly recom-
mends that the engine oil be replaced before
canceling the system activation.
• Even if the engine oil has been replaced with
the system not operating, it is still necessary
to perform the cancellation.
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Df300ap

Table of Contents