Cooling Water Caution System - Suzuki DF250AP Owner's Manual

If the oil temperature caution system activates
when operating, stop the engine immediately, if
wind and water conditions make it to do so.
Check the engine oil condition.
If the oil condition is fine, consult your autho-
rized Suzuki Marine Dealer.
NOTICE
If this system activates for no apparent
reason, there may be a problem with the
system.
Consult your authorized Suzuki marine
dealer.
26

COOLING WATER CAUTION SYSTEM

This system is activated when the cylinder wall
temperature is too high due to insufficient water
cooling.
NOTE:
The cooling water caution system will not detect
high combustion chamber temperature caused
by, for example, an oil system malfunction, poor
quality fuel, or spark plugs with an incorrect
heat range.
If this system activates, the "Over Heat" is dis-
played on meter screen, and the buzzer
sounds. In addition, when this system is acti-
vated at 2500 r/min. or higher, engine speed will
automatically be reduced to approximately
2500 r/min.
If you continue to run, the engine will automati-
cally stop 3 minutes after beginning of the
above CAUTION system activation.
NOTE:
In case that the engine is automatically stopped
due to the CAUTION system, the engine can be
started again.
However the CAUTION system will repeatedly
activate until eliminating the cause.
Over Heat
By pressing the "ENTER" button after confirm-
ing the display of "Over Heat", the caution alarm
icon appears on the display screen and then
the "Over Heat" indication will be cleared.