Clock; Alarm - Suzuki DF250AP Owner's Manual

CLOCK

The time of day can be shown on a 4 inch or 2
inch display in either Analog or Digital format.
The correct time of day will show only when a
GPS antenna is installed on the network and a
Position is Acquired.
4 inch DISPLAY
Analog Clock
To show the analog clock, press [MENU], scroll
to PAGES, press [ENTER], scroll to ADD A
PAGE, press [ENTER], select CLOCK and
press [ENTER].
2 inch DISPLAY
Analog Clock
To show the Analog clock, press [MENU], scroll
to PAGES, press [MENU], scroll to ADD A
PAGE, press [MENU], select CLOCK and press
[MENU].
22

ALARM

Alarms alert the user of an operating condition
that requires action. If an alarm occurs, the
gauge screen will display the active alarm
screen immediately.
NOTE:
Alarm activation automatically replaces the cur-
rent data display with the alarm screen display.
After confirming the display of the alarm,
acknowledge the alarm by pressing ENTER.
After one alarm is acknowledged, if there is a
second alarm, it will also display.
Acknowledge the second alarm (if necessary)
by pressing ENTER.
Once all alarms have been acknowledged, the
gauge screen will clear.
The caution alarm (icon) will remain illuminated
and the alarm buzzer will sound until the oper-
ating condition causing the alarm is corrected.
Check
Engine
X X