General - HELIX 9600 Installation, Operation And Maintenance Instructions

Specifications
Pressure Drop (inlet-to-outlet)
NOTE: Water conditioning may be required for applications not meeting these requirements.
.07
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
1
Figure 1-3
NOTE:
water inlet to water outlet. You must provide the correct pressure drop in your water supply system to ensure that
the water flow condition meets the requirements specified in

General

1-6 Part Number 8040437, Revision 104, 06/12/2007, ECO Number 18068
Table 1-3: Cooling Water Specifications (Continued)
Parameter
Maximum Inlet Pressure
Alkalinity
Calcium Carbonate
WATER PRESSURE DROP (Bars
.21 .35
3
5
WATER PRESSURE DROP (PSID
defines the water flow rate through the Compressor as a function of the pressure drop from
Figure 1-3: Water Flow Rate versus Pressure Drop
The information in
specifications.
)
.49
7
)
Table 1-3
.
Table 1-4 provides general Compressor operating
Value
Figure 1-3
See
100 psi (6.9 bars)
6.0 - 8.0 pH
< 75 ppm
.63 .77
9 11
©2007 Helix Technology Corporation
15.2
13.3
11.40
9.50
7.60
5.70
3.80
1.90